We are consistently updating hardware and software of our components to make our products better. Also the kits are being sold and moved from the original purchaser to another owner and sometimes things either short out or get damaged during the process. We also have some new addons that might help you go faster and more consistent. Shipping will need to be added and figured. Email StanleyW@Getawaycarz.com for any of the listed below items and an invoice will be made up for you to purchase
Will need the transbrake computer sent in to be mated against the newly made harness and tested properly. This will get you a nicely labelled harness with about 8ft of length to it
If the computer was made for a common vehicle no harness will need to be sent in with the box but in some cases the box may have a special build to it. If it is wired into a vehicle we can figure this out but if it is not wired in then its just easier to send with the harness. Then we can check the operation of the box and update it to the latest software
We can help with the installation of a kit sometimes by modifying the shape of the box itself and put mounting ears in different locations and such. Shoot us an email and tell us what you have in mind. Sometimes a completely hidden box with a remote on/off switch and bump adjustment would be a cleaner install for a build. This 2 piece design requires some measuring
Bracket racing situations, someone better with the lights using a delay box or you just want to be able to look straight down the track and let a delay box launch for you. Whatever the reason to use a delay box we can modify the transbrake computers to work with the common delay boxes in the market. Some added circuitry and software is needed to be done to the transbrake computer so it needs to be sent in or added to a newly purchased kit
If you have an issue with a valve body or tehcm or the kit is being used in a different vehicle and need to modify the new vehicles parts you can send in the unmodded valve body/tehcm assembly and the transbrake computer you wish to have mated and we can make it happen
If someone used your Transbrake Computer for a wheel chock at some point or whatever the reason it cannot be used and you need a replacement we can make up a new one with the latest software and get it to you. This will come with a new 8ft wiring harness with the new labels on each wire as well as the transmission connector pins on the ends for the ones that need them. A picture of your transmission connector will need to be emailed to be sure of the pinout
Copyright © 2017 GetawaycarZ Engine Swaps and Exhaust - All Rights Reserved.
Powered by GoDaddy